TP-Link TL-PA4030 Join an existing Powerline AV Network, Leave an existing Powerline AV Network

Page 28

TL-PA4030AV500 3-port Mini Powerline Adapter

Join an existing Powerline AV Network:

Powerline adapter A and Powerline adapter B form a HomePlugAV Network, Powerline adapter C wants to join this network.

Step 1. Press and hold the Pair button on Powerline adapter C for 1 second.

Step 2. Within 2 minutes, press and hold the Pair button on Powerline adapter A/B for 1 second.

Step 3. Wait for about 60 seconds while your Powerline adapters are connecting. The Power LEDs on Powerline adapter A/B and C will stop flashing and become solid light when the connection is made.

)Note:

The sequence of Step 1 and Step 2 can be exchanged.

Leave an existing Powerline AV Network:

As the figure above shown, Powerline adapter A, B and C have formed a HomePlugAV Network. The user wants to remove one device (Powerline adapter A) from this network.

Step 1. Press and hold the Pair button on Powerline adapter A for at least 10 seconds. Powerline adapter A will reset and restart. (The Power LED of Powerline adapter A will momentarily extinguish during resetting, flash during restarting, and then illuminate steadily.)

Step 2. Wait for the reset to complete.

22

Image 28
Contents TL-PA4030 AV500 3-port Mini Powerline Adapter REV1.0.0 1910010881Copyright & Trademarks FCC Statement Safety Information Product Description AV500 3-port Mini Powerline Adapter Yang Hongliang Product Manager of International BusinessContents Package Contents Important Safety Instructions IntroductionConventions System RequirementTL-PA4030AV500 3-port Mini Powerline Adapter Connecting Mechanism LED IndicatorIntroduction Status IndicationPhysical Interface Interface DescriptionConnection Instruction Hardware Connection ComputerHardware Connection Internet TL-PA4030AV500 3-port Mini Powerline Adapter Installing Management Utility TL-PA4030AV500 3-port Mini Powerline Adapter TL-PA4030AV500 3-port Mini Powerline Adapter TL-PA4030AV500 3-port Mini Powerline Adapter Using the Management Utility StatusSet Local Device’s Network Name Network Rename the Remote Device/Enter Password Add DeviceAdvanced System Upgrade Firmware Reset Device To upgrade the devices firmware, follow these instructionsSet All Devices’ Network Name Advanced Feature How to Use the Pair Button Set Up a Powerline AV Network with the Pair ButtonCreate a Powerline network using the Pair button: Pair Secure with 128 bits-AESJoin an existing Powerline AV Network Leave an existing Powerline AV NetworkAppendix a Troubleshooting Power LED does not light up. Ans. Check the followingPowerline LED does not light up Ethernet LED does not light up