TP-Link TL-PA4030 manual Upgrade Firmware

Page 25

TL-PA4030AV500 3-port Mini Powerline Adapter

4.4.1 Upgrade Firmware

Click the Upgrade Firmware button to upgrade the version of the firmware for the adapter and the following dialog will pop up.

z

z

NVM: None-volatile memory. It is used for upgrading the firmware.

PIB: Parameter Information Block. It contains configuration values that establish device network identity, general capabilities and operational modes.

19

Image 25
Contents REV1.0.0 1910010881 TL-PA4030 AV500 3-port Mini Powerline AdapterCopyright & Trademarks FCC Statement Safety Information Yang Hongliang Product Manager of International Business Product Description AV500 3-port Mini Powerline AdapterContents Package Contents Introduction Important Safety InstructionsConventions System RequirementTL-PA4030AV500 3-port Mini Powerline Adapter LED Indicator Connecting MechanismIntroduction Status IndicationInterface Description Physical InterfaceHardware Connection Computer Connection InstructionHardware Connection Internet TL-PA4030AV500 3-port Mini Powerline Adapter Installing Management Utility TL-PA4030AV500 3-port Mini Powerline Adapter TL-PA4030AV500 3-port Mini Powerline Adapter TL-PA4030AV500 3-port Mini Powerline Adapter Status Using the Management UtilitySet Local Device’s Network Name Network Add Device Rename the Remote Device/Enter PasswordAdvanced System Upgrade Firmware Reset Device To upgrade the devices firmware, follow these instructionsSet All Devices’ Network Name Set Up a Powerline AV Network with the Pair Button Advanced Feature How to Use the Pair ButtonCreate a Powerline network using the Pair button: Pair Secure with 128 bits-AESLeave an existing Powerline AV Network Join an existing Powerline AV NetworkPower LED does not light up. Ans. Check the following Appendix a TroubleshootingPowerline LED does not light up Ethernet LED does not light up