•Class support: USB Mass Storage Class (MSC)
•File system: FAT16 and FAT32
•Supports MP3 and WMA file formats
Main unit
•• Power supply: 120V~, 60 Hz
•• Power consumption: 40 W
•• Standby power consumption: ≤ 0.5 W
•Speaker impedance: 8 ohm (full range)
•Speaker drivers: 4 x 54.5 mm (2")
•• Dimensions (WxHxD): 845 x 74.5 x 94 mm
•• Weight: 2.0 kg
Remote control batteries
• 1 x
7 Troubleshooting
Warning
••Risk of electric shock. Never remove the casing of the product.
To keep the warranty valid, never try to repair the product yourself.
If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www. philips.com/support.
Sound
No sound from SoundBar speakers.
•Connect the audio cable from your SoundBar to your TV or other devices.
•Reset your SoundBar to its factory settings.
•On the remote control, select the correct audio input.
•Make sure that the SoundBar is not muted.
Distorted sound or echo.
•If you play audio from the TV through the SoundBar, make sure that the TV is muted.
12EN