Philips HTL2101 manuel dutilisation Wall mount, Product Specifications, Amplifier, Audio

5 Wall mount

Note

••Koninklijke Philips Electronics N.V. bears no responsibility for improper wall mounting that results in accident, injury or damage. If you have any query, contact Philips Consumer Care in your country.

••Before wall mounting, make sure the wall can support the weight of your SoundBar.

Screw length/diameter

Depending on the type of wall mounting your SoundBar, make sure that you use screws of a suitable length and diameter.

3 - 3.5mm

> 25mm

For information about how to wall mount your SoundBar, see the quick start guide.

6 Product
specifications	E n g l i s h

Note

••Specifications and design are subject to change without notice.

Amplifier

•FTC total output power 34W

•Left + Right : 34W (1%THD, 8ohm, 90Hz-20kHz)

•Total output power: 40W RMS (+/- 0.5 dB, 10% THD)

•Frequency response: 20 Hz-20 kHz / ±3 dB

•Signal-to-noise ratio: > 65 dB (CCIR) / (A-weighted)

•Input sensitivity:

•AUX: 650 mV

•AUDIO-IN: 400 mV

Audio

•S/PDIF Digital audio input:

•Coaxial: IEC 60958-3

•Optical:TOSLINK

•Sampling frequency:

•MP3: 8 kHz, 11 kHz, 12 kHz, 16 kHz, 22 kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz

•WMA: 44.1 kHz, 48 kHz

•Constant bit rate:

•MP3: 8 kbps-320 kbps

•WMA: 64 kbps-192 kbps

•Version:

•WMA:V7,V8,V9

USB

• Compatibility: Hi-Speed USB (2.0)

EN 11