MP3 player, USB storage devices, Equalizer

Press TREBLE +/- or BASS +/- to change the frequency.

• Press RESET to reset your treble/ bass level to the default settings programmed at the factory.

»»All Source indicators on the main unit blink twice when treble or bass is set to the maximum or minimum value.

Equalizer

Change the high frequency (treble) and low frequency (bass) settings of the SoundBar.

Note

••This product may not be compatible with certain types of USB storage device.

••If you use a USB extension cable, USB HUB, or USB multi-reader, the USB storage device may not be recognized.

••Digital camera PTP protocols are not supported.

••Do not remove the USB storage device while it is being read.

••DRM-protected music files (MP3, WMA) are not supported.

••Support a USB port: 5V , 500mA.

Connect your MP3 player to play your audio files or music.

What you need

• An MP3 player.

• A 3.5mm stereo audio cable.

1 Using the 3.5mm stereo audio cable, connect the MP3 player to the AUDIO-IN connector on your SoundBar.

3 Press the buttons on the MP3 player to select and play audio files or music.

Enjoy audio on a USB storage device, such as an MP3 player and USB flash memory, etc.

What you need

• A USB storage device that is formatted for FAT file systems, and complies with the Mass Storage Class.

• An MP3 or WMA file on a USB storage device

1 Connect a USB storage device to the SoundBar.

2 Press USB on the remote control.

»»The play starts after a few seconds.

You can reset your SoundBar to the default settings programmed at the factory.

1 In mute mode, quickly press AUX twice.

»»The factory settings is restored.

10EN