ZyXEL Communications AG-225H manual Problems Communicating With Other Computers

ZyXEL AG-225H User’s Guide

6.3Problems Communicating With Other Computers

Table 6-3 Troubleshooting Communication Problems

PROBLEM	CORRECTIVE ACTION
The ZyXEL AG-225H	Make sure you are connected to the network.
computer cannot
communicate with the other
computer.

A.Infrastructure Make sure that the AP and the associated computers are turned on and working properly.

Make sure the ZyXEL AG-225H computer and the associated AP use the same SSID.

Change the AP and the associated wireless clients to use another radio channel if interference is high.

Make sure that the computer and the AP share the same security option and key. Verify the settings in the Profile Security Settings screen.

B.Ad-Hoc (IBSS) Verify that the peer computer(s) is turned on.

Make sure the ZyXEL AG-225H computer and the peer computer(s) are using the same SS ID and channel.

Make sure that the computer and the peer computer(s) share the same security option and key.

Change the wireless clients to use another radio channel if interference is high.

6.4Problem Connecting to an Access Point

Table 6-4 Troubleshooting Access Point Connection Problem

PROBLEM	CORRECTIVE ACTION
When using the Windows	The ZyAIR might still be operating in access point mode. This results
XP configuration tool, cannot	when you set the ZyAIR to operate in access point mode using the ZyXEL
scan for or connect to any	Utility, close the ZyXEL Utility and then use the Windows XP configuration
access points.	tool.
	Before you use the Windows XP configuration tool, make sure you set the
	ZyAIR to operate in station mode before you close and exit the ZyXEL
	Utility.

6-2 Troubleshooting