ZyXEL
1.3LCM Description
Detect Mode
Display up to 15 detected networks in the order of the
signal strength
Display the detected networks without any security setting (free hot spot).
Display the dedicated network you choose to use
Security Information
WEP security is enabled.
WPA security is enabled. 
Wireless security is disabled (no security)
Signal
Indicate A/B/G World Wide Radio Band.
Entry
Display the current entry of the detected Access Points. Users can detect up to 15 networks at one time.
Channel
Display the radio channel of the detected network.
SSID
The SSID identifies the Service Set to the network users detect. When the length of SSID is longer than 12 characters, it will be scrolled horizontally.
5 levels of signal strength.
802.11a mode at 5 GHz band
802.11b mode at 2.4 GHz band 
802.11g mode at 2.4 GHz band
Power
Display Low Battery
Display Full Battery
1.4Basic Operation
Follow the instructions in the Quick Start Guide to know how to operate
1.5ZyXEL AG-225H Adapter Hardware and Utility Installation
Follow the instructions in the Quick Start Guide to install the ZyXEL Utility and make hardware connections.
1.6Using the ZyXEL Utility to Configure Your Network
The following are explanations on how to configure and use the ZyXEL Utility program. For initial setup, please see the included Quick Start Guide.
Getting Started |