ZyXEL Communications 100 Diagnostic Tools Link Quality Test Master Test Station, Description

ZyAIR 100 Wireless PC Card

Figure 4-7 Diagnostic Tools – Link Quality Test (Master Test Station)

The following table explains the status/statistical information found in the Master Test Station screen.

Table 4-1 Diagnostic Tools – Link Quality Test Menu Fields (Master Test Station)

ITEM	DESCRIPTION
Slave/Test	The physical address of the Destination Slave Test Station. (The physical address of
Address	your wireless station will be displayed when performing Access Point loopback test.)
Packet Sent	Total test packets that have been sent.
Packet Received	Total responding packets that have been received.
Time Elapsed	Total test time.
Signal Level	The signal level when receiving the last responding packet. Signal level is calculated
	as the percentage of its signal level measurement relative to the full signal level.

Parameter Configuration 4-11