Physical Specifications

AAM1212-53 Line Card

•One Telco 50 connector for 12-port ADSL/ ADSL2/ADSL2+ and splitter card over ISDN

•One mini RJ11 console port for local management

•Two 10/100Base-TX for uplink

•DELT (Dual End Loop Test)

•SELT (Single End Loop Test)

•Power enhancement or ADSL power saving mode

•Rate adaptation

•Status LEDs—System Status, Ethernet 1 and 2 Link Status, Ethernet 1 and 2 Active Status, ADSL ports status, Alarm

•ADSL compliance

-DMT T1.413, issue 2

-G.DMT (ITU G.992.1)

-G.LITE (ITU G.992.2)

-G.HS (ITU G.994.1)

-Auto-negotiating rate adaptation

-ADSL2: G.992.3 Annex B

-ADSL2+: G.992.5 Annex B

SAM1316-22 Line Card

•One Telco 50 connector for 16-port G.SHDSL.bis

•One mini RJ11 console port for local management

•Two 10/100Base-TX for uplink

•In-band Ethernet management

•Status LEDs: System Status, Ethernet Link Status, Ethernet Active Status, G.SHDSL.bis ports status, Alarm

•Line coding: TC-PAM

•Transmit power: up to 16.8 dBm

•Density: 16 ports per line card

•SHDSL payload format: ATM or EFM

•Rate adaptation mode: fixed, line probing

•Ethernet in the First Mile (EFM) according to IEEE 802.3-2004

•SHDSL.bis, extended data rates up to 5.7 Mbit/s

•STU-C or STU-R mode

•Fully integrated one solution for Ethernet, Packet and ATM transport over 4/2 SHDSL channels

•Asymmetric PSDs according to ITU-T G.991.2 (2004) Annex A and B fully supported

•In compliance with

-ETSI SDSL (ETSI TS 101 524 V 1.2.1)

-ETSI SDSL.bis (ETSI TS 101 524 V 1.2.2)

-ITU G.shdsl (ITU-T G.991.2)

-ITU G.shdls.bis (ITU-T G.991.2 (2004))

-ITU G.hs (ITU-T G.994.1)

-IEEE EFM (IEEE 802.3-2004)

-ITU-T G.998.1

VOP1224-61 Line Card

•One Telco 50 connector for 24 FXS ports over

POTS

•One mini RJ11 console port for local management

•Two 10/100Base-TX for uplink

•Ringer Max output power: 14 Watt

•Support SIP singling protocol

•Support G.711, G.726, G.729 a/b, G.723.1

•Support T.38 fax/modem signal coding & fax relay (G.711 a/m)

•Echo cancellation based on ITU-T G.168 , G.165

•Silence detection/suppression and Comfort Noise Generation (CNG)

•Voice Activity Detection (VAD)

•Caller ID detection (for VoIP packets from uplink)

•10K Busy Hour Call Attempts (BHCA)

•Configurable jitter buffer

•Support the generation of dial tone, second dial tone, ringing tone (ring-back tone), busy tone, off-hook warning tone

•Support call waiting, call hold, call transfer, return and call back on busy

•MLT (Metallic loop testing for subscriber lines) and GR-909 loop diagnostic

IES-1000M

•Dimensions: 440 (W) x 320 (D) x 44 (H) mm

•Weight: 3.7 Kg

AAM1212-51

•Dimensions: 170 (W) x 320 (D) x 35 (H) mm

•Weight: 0.9 Kg

AAM1212-53

•Dimensions: 170 (W) x 320 (D) x 35 (H) mm

•Weight: 0.9 Kg

SAM1316-22

•Dimensions: 170 (W) x 320 (D) x 35 (H) mm

•Weight: 0.9 Kg

VOP1224-61

•Dimensions: 170 (W) x 320 (D) x 35 (H) mm

•Weight: 0.8 Kg

Environmental Specifications

•Power supply (AC/DC)

-AC power: 100 ~ 240 V AC, 50 ~ 60 Hz

-DC power: -36 ~ -72 V DC

•Power consumption

-AAM1212-51: 25 W

-AAM1212-53: 25 W

-SAM1316-22: 25 W

-VOP1224-61: 30 W

•Operating temperature: 0°C ~ 50°C

•Storage temperature: -40°C ~ 70°C

•Operating humidity:10% ~ 90% (non-condensing)

•Storage humidity: 10% ~ 95% (non-condensing)

Certification

•Safety

-UL 60950-1

-CSA 60950-1

-EN60950-1

-IEC 60950-1

•EMC

-FCC Part 15B Class A

-EN55022 Class A

-EN55024 Class A

-ETSI 300386

•Reliability

-ETSI 300019

•Telecom

-ITU-T K20

1U Remote MSAN/DSLAM	ADSL2+ Line Card	G.SHDSL.bis Line Card	VoIP Line Card
with AC/DC Power	AAM1212-51/53	SAM1316-22	VoP1224-61
IES-1000	AAM1212-51/53	SAM1316-22	VoP1224-61
IES-1000