ZyXEL Communications 100WH quick start Windows 95 Quick Start, TCP/IP Installation

Page 13

Prestige 100WH Quick Start Guide

Chapter 3

Windows 95 Quick Start

This chapter shows you the step-by-step instructions to configure your Windows 95 workstations for Internet access.

3.1TCP/IP Installation

You must first install TCP/IP protocol on each Windows 95 workstation before you can use it to access the Internet. If you have already installed TCP/IP, skip to the TCP/IP Configuration section on page 9; otherwise, follow these steps:

Step 1. From the Start Menu, select Settings then open Control Panel.

Step 2. Double-click the Network icon to open the Network control panel.

Step 3. Click the Add button in the Network control panel to add a new protocol.

9

Image 13

Contents ZyXEL Prestige 100WH Table of Contents Prestige Web Configurator Setup Purpose Of This Guide Before You BeginWho Should Not Use This Guide Information From Your ISP Dhcp Setting Prestige’s Default TCP/IP SettingsIP Address and Subnet Mask Page Prestige 100WH Front Panel Cabling & InstallationFront Panel Description LED Front Panel LedsWAN Port Status LEDs Prestige 100WH Back PanelPrestige 100WH Connections PSTN/ISDNWindows 95 Quick Start TCP/IP InstallationThis will install the TCP/IP protocol on your workstation TCP/IP Configuration Prestige 100WH Quick Start Guide Prestige 100WH Quick Start Guide Prestige 100WH Quick Start Guide Windows NT Quick Start This will install the TCP/IP protocol on you workstation TCP/IP Configuration Prestige 100WH Quick Start Guide Prestige 100WH Quick Start Guide Prestige 100WH Quick Start Guide Installing PWC Components Prestige Web Configurator SetupPrestige 100WH Quick Start Guide Prestige 100WH Quick Start Guide Starting the Prestige Web Configurator Contacting ZyXEL Customer Support ZyXEL Prestige 100WH

Related manuals

Manual 126 pages 31.02 Kb