ZyXEL Communications 100WH Prestige’s Default TCP/IP Settings, IP Address and Subnet Mask

Page 7

Prestige 100WH Quick Start Guide

1.4Prestige’s Default TCP/IP Settings

1.4.1IP Address and Subnet Mask

Your Prestige is pre-configured in the factory with IP Address of 192.168.1.1 and subnet mask of 255.255.255.0 (Class C).

1.4.2DHCP Setting

Your Prestige has a built-in DHCP (Dynamic Host Configuration Protocol) server. DHCP allows the individual workstations on a network to obtain their TCP/IP configuration at start- up from a centralized DHCP server (in this case, the Prestige).

The Prestige’s DHCP server is enabled by default. The server has a pool of 32 IP addresses ranging from 192.168.1.33 to 192.168.1.64. To minimize your workload, we recommend that you leave the DHCP server enabled, unless you already have another DHCP server running or other specific reasons.

3

Image 7

Contents ZyXEL Prestige 100WH Table of Contents Prestige Web Configurator Setup Purpose Of This Guide Before You BeginWho Should Not Use This Guide Information From Your ISP Dhcp Setting Prestige’s Default TCP/IP SettingsIP Address and Subnet Mask Page Prestige 100WH Front Panel Cabling & InstallationFront Panel Description LED Front Panel LedsWAN Port Status LEDs Prestige 100WH Back PanelPrestige 100WH Connections PSTN/ISDNWindows 95 Quick Start TCP/IP InstallationThis will install the TCP/IP protocol on your workstation TCP/IP Configuration Prestige 100WH Quick Start Guide Prestige 100WH Quick Start Guide Prestige 100WH Quick Start Guide Windows NT Quick Start This will install the TCP/IP protocol on you workstation TCP/IP Configuration Prestige 100WH Quick Start Guide Prestige 100WH Quick Start Guide Prestige 100WH Quick Start Guide Installing PWC Components Prestige Web Configurator SetupPrestige 100WH Quick Start Guide Prestige 100WH Quick Start Guide Starting the Prestige Web Configurator Contacting ZyXEL Customer Support ZyXEL Prestige 100WH

Related manuals

Manual 126 pages 31.02 Kb