Lindy 42829 user manual Web Server

Page 14

EN 14

Select the Printer which was connected and Click on “Save” and close the Window.

Once the Printer is configured for Auto-Connect mode, It remains free as long as the Printer is connected and becomes “Busy” only when a user prints to the printer connected.

Multiple User print jobs will be executed on a time sharing basis.

3. Web Server

The USB 2.0 DEVICE SERVER Combo has a user-friendly web browser interface to configure the box.

To open the web interface just type the IP address of the box, i.e: http://192.168.3.22:901 in the browser. (Make sure that the proxy server is disabled on your PC©s Internet explorer).

A dialog prompts for the username and password. The username is “root” and the default password is “combo".

Image 14
Contents USB 2.0 IP Device Server English Manual Introduction TheVirtual USB-IP Driver Software Device Mapping Page Server Manager Page Server Configuration IP Settings Password Firmware Upgrade Restore factory defaults Printer Auto-ConnectWeb Server Network Settings Secure NAS Settings Shares setting User Settings IPSec Security Settings Status Virtual USB-IP Settings Upgrade Click on upgrade to upgrade the firmware Accessing the Network drive Type the box name in the Run dialog as follows \\mcs8140 Radio Frequency Energy, Certifications