EN 5
2.2. Device Mapping
Device Mapping enables virtualization of all USB Devices connected to the USB 2.0 DEVICE SERVER unit in your LAN on your local PC.
Click on the Green Arrow Button in the Admin utility to start the device mapping, which will automatically start the ‘Found New Hardware’ wizard to install the Virtual USB driver.
Continue the Add New Hardware wizard to install the Virtual USB driver for the USB 2.0 DEVICE SERVER Admin utility.
Select “Search for a suitable driver for my device (recommended)” and click on ‘Next’, the Operating System automatically will search for the driver until the Virtual USB over IP driver is installed.
Please Click on “Continue anyway” if a Windows dialog pops up about the Digital Signature as shown below.
Power on the USB 2.0 DEVICE SERVER board and connect an Ethernet cable from the USB 2.0 Device Server Ethernet port to your Local Area Network.
The USBIP Admin utility is capable enough to identify the USB 2.0 DEVICE SERVER USB servers by it’s IP address on the network. As soon as the USB 2.0 DEVICE SERVER box is detected with a specific IP address the Windows automatically invokes a Found New Hardware Wizard to install the drivers for the USB server box.
NOTE: For proper enumeration of device remove the Firewall from the Windows Machine.