Lindy 42829 user manual Upgrade

Page 22

EN 22

The status page displays the current status of the USB devices attached.

•Device Status:

•Vendor Id

•Product Id

•Class Id

•Peer-ip address

•Status

This status page is updated automatically every 10 seconds and it shows the device connected to USB 2.0 DEVICE SERVER board.

The Device Status table shows the Vendor Id, Product Id, Class, Peer-IP and the Status of the Device connected. The Peer-IP is the IP Address of the computer on which the device is currently accessed. Whenever any Device is Busy the Status of that device changes to “BUSY” and whenever it is not being used it changes to “FREE” as shown below.

3.3.2. The Upgrade Page

The Upgrade page allows you to upgrade the firmware.

Select the file to be upgraded by click on the Browse option on the Upgrade page as shown below.

Page 21 Page 23
Image 22
Page 21 Page 23
Contents USB 2.0 IP Device Server English Manual Introduction TheVirtual USB-IP Driver Software Device Mapping Page Server Manager Page Server Configuration IP Settings Password Firmware Upgrade Restore factory defaults Printer Auto-ConnectWeb Server Network Settings Secure NAS Settings Shares setting User Settings IPSec Security Settings Status Virtual USB-IP Settings Upgrade Click on upgrade to upgrade the firmware Accessing the Network drive Type the box name in the Run dialog as follows \\mcs8140 Radio Frequency Energy, Certifications
Top Page Image Contents