Kramer Electronics VS-1211 user manual Limitation of Implied Warranties

Page 25

LIMITATION OF IMPLIED WARRANTIES

All implied warranties, including warranties of merchantability and fitness for a particular purpose, are limited in duration to the length of this warranty.

EXCLUSION OF DAMAGES

Kramer’ s liability for any defective products is limited to the repair or replacement of the product at our option. Kramer shall not be liable for:

1.Damage to other property caused by defects in this product, damages based upon inconvenience, loss of use of the product, loss of time, commercial loss; or:

2.Any other damages, whether incidental, consequential or otherwise. Some countries may not allow limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations and exclusions may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights, which vary from place to place.

NOTE: All products returned to Kramer for service must have prior approval. This may be obtained from your dealer.

NOTICE

This equipment has been tested to determine compliance with the requirements of:

EN-50081:

"Electromagnetic compatibility (EMC);

 

generic emission standard.

 

Part 1: Residential, commercial and light industry"

EN-50082:

"Electromagnetic compatibility (EMC) generic immunity standard. Part 1:

 

Residential, commercial and light industry environment".

CFR-47

FCC Rules and Regulations:

 

Part 15- “ Radio frequency devices:

 

Subpart B- Unintentional radiators

CAUTION

￿￿Servicing the machines can only be done by an authorized Kramer technician. Any user who makes changes or modifications to the unit without the expressed approval of the manufacturer will void user authority to operate the equipment.

￿￿Use the supplied power cord to feed power to the machine.

￿￿Please use recommended interconnection cables to connect the machine to other components.

KRAMER ELECTRONICS LTD.

25

 

Image 25
Contents Vertical Interval Switchers Table of Contents List of Tables List of IllustrationsIntroduction Word on Video/Audio SwitchersBalanced Audio Family Unbalanced Audio FamilyFactors Affecting Quality of Results Specifications HOW do I GET STARTED? Optional AccessoriesRS-232 Control Connector Wiring Kramer VS Series SwitchersVS-1011xlm/VS-1201xl Front/Rear Panel Features Getting to Know Your SwitcherFeature Table VS-1211/1201/1001xlm Rear Panel FeaturesInput Selector pushbuttons Connecting to Video Devices InstallationConnecting to Audio Devices DIP SWITCHES, Jumpers and TrimmersDIP Switch # Table DIP Switch Settings Switcher #Jumpers, their Uses and Set-up Requirements Figure Location of Internal Jumpers Internal Trimmers Controlling the SwitcherVS-2000 System VS-1N/VS-1P SystemPage Using the Switcher Connecting to a PCPowering on the Switcher Operating an Individual SwitcherSelecting an Input on the Switchers Using the PC Control SoftwareUsing the VS-2000 Adding OutputsAdding Inputs Figure Connecting Two Switchers for adding More OutputsTaking Care of Your Switcher Video Component and YC SwitchingTroubleshooting Video Signal Power and IndicatorsProblem Remedy Problem Remedy Audio SignalSoftware Switching MalfunctionsControl Protocol Used for VS-1211/1201xl Communication Vertical IntervalWhere Several special codes are also validLimited Warranty Limitation of Implied Warranties 2900-002002 REV