Kramer Electronics user manual VS-42H 4x2 Hdmi Matrix Switcher Front Panel Features

Your VS-42H 4x2 HDMI Matrix Switcher

Table 2: VS-42H 4x2 HDMI Matrix Switcher Front Panel Features

#	Feature		Function
1	IR Receiver		The red LED lights when receiving signals from the
			Infra-red remote control transmitter
2	POWER Switch		Illuminated switch for turning the unit ON or OFF
3	INPUT SELECTOR	TO OUTPUT 2	Press an INPUT SELECTOR button to select an input
	Buttons		(from 1 to 4) to switch to output 2
4		TO OUTPUT 1	Press an INPUT SELECTOR button to select an input
			(from 1 to 4) to switch to output 1
5	OFF Buttons	TO OUTPUT 1	Press to toggle disconnecting output 1
6		TO OUTPUT 2	Press to toggle disconnecting output 2
7	EDID Button1		Press to acquire the EDID
8	STO Button		Press to store an input setting
9	RCL Button		Press to recall an input setting
10	LOCK Button		Press to toggle disengaging the front panel buttons and
			to acquire the EDID (see section 7.1)
	Table 3: VS-42H 4x2 HDMI Matrix Switcher Rear Panel Features
#	Feature		Function
11	IN HDMI Connectors		Connect to the HDMI sources (from 1 to 4)
12	OUT 1 HDMI Connector		Connect to the HDMI acceptor 1
13	OUT 2 HDMI Connector		Connect to the HDMI acceptor 2
14	RS-2329-pin D-sub Port		Connects to the PC or the Remote Controller2
15	ETHERNET Connector		Connects to the PC or other Ethernet Controller
16	RESET Button		Press the ETHERNET factory reset button to reset to the
			factory default definitions3:
			IP number − 192.168.1.39
			Mask – 255.255.255.0
			Gateway – 192.168.1.1
17	Power Connector with Fuse		AC connector enabling power supply to the unit

1 Illuminates when configuring the EDID

2 Via a null-modem connection

3 First disconnect the power cord and then connect it again while pressing the RESET button. The unit will power up and load its memory with the factory default definitions

7