Your
3.3Recommendations for Best Performance
To achieve the best performance:
•Connect only good quality connection cables, thus avoiding interference, deterioration in signal quality due to poor matching, and elevated noise levels (often associated with low quality cables)
•Avoid interference from neighboring electrical appliances and position your
3.4Terminology Used in this User Manual
Table 1 defines some terms that are used in this user manual.
Table 1: Terminology Used in this User Manual
Term | Definition |
802.3 | The standard specification for ETHERNET that is maintained by the Institute of Electrical |
| and Electronics Engineers (IEEE). |
Dynamic Host | Allows the network administrator to distribute IP addresses from a central point and |
Configuration | automatically send a new IP address when an Ethernet point is plugged into a different |
Protocol (DHCP) | network location. |
Gateway | A network position serving as an entry to another network. On the Internet, a node or |
| stopping point can be either a gateway node or a host |
IP Address | A |
| particular server or workstation) of data (HTML pages or |
| across the Internet. Every device connected to an IP network must have a unique IP |
| address. This address is used to reference the specific unit. |
Local Area Network | Computers sharing a common communications line or wireless link, which often share a |
(LAN) | server within a defined geographic area. |
Media Access | A computer's unique hardware number (or address) in a LAN or other network. On an |
Control (MAC) | Ethernet LAN, the (MAC) address is identical to the Ethernet address. |
Address |
|
Transmission | The basic communication language or protocol of the Internet that breaks the message |
Control | into appropriately sized packets for the network, and can be used as a communications |
Protocol/Internet | protocol in an intranet or an extranet. |
Protocol (TCP/IP) |
|
4 Your VS-42H 4x2 HDMI Matrix Switcher
Figure 1 illustrates the front and rear panels of the VS-42H. Table 2 and Table 3 define the front and rear panels of the VS-42H, respectively.
5