Lindy No. 39123 user manual Radio Frequency Energy, Certifications, Safety information

Page 14

Radio Frequency Energy, Certifications

Safety information

For use in dry, oil free indoor environments only.

Warning - live parts contained within power adapter.

No user serviceable parts within power adapter - do not dismantle.

Replace the power adapter with a manufacturer approved type only.

Do not use the power adapter if the power adapter case becomes damaged, cracked or broken or if you suspect that it is not operating properly.

Do not attempt to service the LINDY Console Switch yourself.

Radio Frequency Energy

All interface cables used with this equipment must be shielded in order to maintain compliance with radio frequency energy emission regulations and ensure a suitably high level of immunity to electromagnetic disturbances.

European EMC directive 89/336/EEC

This equipment has been tested and found to comply with the limits for a information technology device in accordance with the specifications in the European standard EN55022 and EN55024. These limits are designed to provide reasonable protection against harmful interference.

FCC Compliance Statement (United States)

This equipment generates, uses and can radiate radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio communication. It has been tested and found to comply with the limits for a class A computing device in accordance with the specifications in Subpart J of part 15 of FCC rules, which are designed to provide reasonable protection against such interference when the equipment is operated in a commercial environment. Operation of this equipment in a residential area may cause interference, in which case the user at his own expense will be required to take whatever measures may be necessary to correct the interference. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

Canadian Department of Communications RFI statement

This equipment does not exceed the class A limits for radio noise emissions from digital apparatus set out in the radio interference regulations of the Canadian Department of Communications.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe A prescrites dans le règlement sur le brouillage radioélectriques publié par le ministère des Communications du Canada.

For Commercial Use

Tested to Comply with

FCC Standards

© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (JULY 2005)

Image 14
Contents Console Switch EnglishIntroduction Main FeaturesEnglish Manual Mounting Installation and OperationComputer or KVM switch ConnectionsPower supply use is optional Keyboards, video monitors and miceDo I need to use the power supply? How to check power requirementsVideo boost feature User arbitration and keyboard indicatorsLindy Console Switch indicators Resetting Lindy Console SwitchPower source selection switch Special ConfigurationConfiguration switches Video signal boost switchEnter upgrade mode at power on switch Reset Lindy Console Switch switchEnter configuration mode switch Using configuration options Hotkey combinationsHot plugging and mouse restoration Mouse speed timing adjustmentMiscellaneous functions Which restore setting do I use? Recognising an Intellimouse-style mouseLindy Console Switch Software Upgrade Where xxx is the upgrade version numberFormat a /S Safety information Radio Frequency Energy, Certifications