system which allows you to disconnect and
Keyboard and mouse mode switching - The LINDY CPU Switch Smart keeps a log of the keyboard and mouse mode and resolution settings requested by each of the connected PCs. These settings are automatically restored to the shared keyboard and mouse when the LINDY CPU Switch Smart channel is switched thus ensuring maximum software compatibility. The keyboard num, caps and scroll lock states are an obvious example of this process.
2.10 Re-enabling a disconnected PS/2 mouse
If you disconnect the shared PS/2 mouse from the LINDY CPU Switch Smart by accident during operation then the mouse operation will be lost when the mouse is plugged back in. To avoid having to reboot the entire system in this situation the LINDY CPU Switch Smart is fitted with an automatic mouse recovery system.
With the PS/2 mouse disconnected, change the channel using the keypad or keyboard hotkeys. The LINDY CPU Switch Smart detects that the mouse has been disconnected and triggers the automatic recovery system. Plug in the PS/2 mouse and the LINDY CPU Switch Smart will
Alternatively you can reset the keyboards and mice by holding down the front panel key for 5 seconds. When the character ‘C’ is displayed on the front of the LINDY CPU Switch Smart, press the front panel key again. A complete power off reset of the connected keyboards and mice will then be performed. This function only resets the shared keyboard and mice that are plugged into the control port. It does not affect the status of any of the other ports on the switch or the CPU connections.
2.11Hot plugging the LINDY CPU Switch Smart into running systems and
It is advisable to switch off the systems that are going to be connected to the LINDY CPU Switch Smart before installation. However, if this is not possible then most systems can be hot plugged by using the LINDY CPU Switch Smart’s mouse restoration functions. The keyboard connection will normally restore itself automatically.
LINDY CPU Switch Smart | Installation and Use | Page 17 |