English Manual | 2 |
OPERATION
Your monitor will only display one PC signal at any one time. All keyboard and mouse commands are sent to this PC only.
After initial power up, port 1 is active by default. When a PC is connected to this port and it is not switched on or is in sleep mode, the monitor will not show any signal. Please note that this is not the sign of a faulty CPU Switch!
The Red Push Button:
Pressing the button switches the PC ports cyclically:
Version 1:2 (No.): | 1 |
|
|
| 2 | Version 1:4 (No. ): |
| ||||||
LED Indicators |
|
LED Status | Meaning |
ON | This PC port is selected and the PC is powered ON |
OFF | This PC port is not selected |
Flashing | This PC port is selected but the PC is powered OFF |
12
4 
3
Direct Port Selection / Keyboard Hot Key Commands:
You can also conveniently command the CPU Switch LITE to switch the CPU port using simple key sequences. To send commands to the KVM switch the SCROLL LOCK key must be pressed twice within 2 seconds. You will hear a beep for confirmation.
Within 2 seconds
Scroll | + | Scroll | + | ↑ | = | Previous Channel | |
| or |
|
|
| |||
Lock |
| Lock |
|
|
| ||
| ↓ |
|
| ||||
+ | + | = | Next Channel | ||||
|
| ||||||
Select PC port : |
|
|
|
| |||
|
|
|
| ||||
Scroll | + | Scroll | + | Port No. | = To select PC1 ~ PC2 or ~ PC4 directly | ||
1…2/4 | |||||||
Lock |
| Lock |
|
| |||
Beeper Function: |
|
|
|
| |||
Scroll | + | Scroll | = | B |
| Beeper | |
Lock | Lock |
| |||||
|
|
|
|
| |||
Auto Scan Mode: |
|
|
|
| |||
Scroll | + | Scroll | + | S | = | Auto Scan (The scan interval is 8 seconds) | |
Lock | Lock | ||||||
|
|
|
| To get out of Auto Scan Mode, | |||
|
|
|
|
|
| ||
Press any key or SPACE bar.