For example, consider a situation where two LINDY CPU Switch units are connected together (as shown in figures 7 and 8). To connect to the computer attached to port 3 on LINDY CPU Switch B
the user would hold down the hotkey keys then press followed by , whilst keeping the hotkey keys pressed. This will have the effect of connecting to port ‘3’ of the LINDY CPU Switch which is connected into port ‘2’ of the first LINDY CPU Switch unit A. (Note: if you are cascading 16 port models then you will need to type a leading 0 before all single digit port numbers).
For example to connect to port 3 on the LINDY CPU Switch cascaded off port 2 of your first LINDY CPU Switch use:
press tsrelease
press release ts
For example to connect to port 14 on the LINDY CPU 16 OSD Switch cascaded off port 1 of your first LINDY CPU 16 OSD Switch use:
press tsrelease press release
press release
press release ts
LINDY ELECTRONICS LTD | Installation & Use – English Guide | Page 23 |