IOGear GCS602 user manual Installation

Page 10

Installation

1.Make sure that power to all the devices you will be connecting up has been turned off. You must unplug the power cords of any computers that have the Keyboard Power On function. Otherwise, the switch will receive power from the computer.

2.To prevent damage to your equipment due to ground potential difference, make sure that all devices on the installation are properly grounded. Consult your dealer for technical details, if necessary.

Step 1. Plug the ADC cable from the ADC display into the Console port connector of the GCS602 unit.

8

Image 10
Contents Port ADC Switch Page Table of Contents Package Contents Overview Features Computer RequirementsConsole Please take note of the followingCPU Port Indicator/Selection Buttons Online LED indicatorsSelected LED indicators Pictorial IntroductionADC Console Connector ADC Connector Console ViewInstallation Installation Installation Installation Operation Manual Port SelectionPower Off Troubleshooting Symptom Possible Cause ActionFrom last table Specification Function SpecificationRadio and TV Interference Statement Limited Warranty Page Contact info