Troubleshooting
Symptom | Possible Cause | Action | |
|
|
| |
Keyboard not | Loose cables | Check all keyboard cable connections to make sure they | |
responding |
| are completely sealed in their sockets | |
|
|
| |
| Keyboard needs to be | Unplug the keyboard from the Console Keyboard Port, then | |
| reset | plug it back in. | |
|
|
| |
| MiniView™ ADC | Turn off both computers (see Powering Off p.13), wait five | |
| needs to be reset | seconds, then turn the computers back on. | |
|
|
| |
| Selected port connects | Change the port manually by pressing the appropriate port | |
| to a powered off | selection switch | |
| computer |
| |
|
|
| |
Mouse not deleted or | Loose cables | Check all mouse cable connections to make sure they are | |
does not respond |
| completely sealed in their sockets | |
correctly |
|
| |
Mouse needs to be | Unplug the mouse from the console mouse port, then plug | ||
| |||
| reset | it back in | |
|
|
| |
| MiniView™ ADC | Turn off both computers (see Powering Off p.13), wait five | |
| needs to be reset | seconds, then turn the computers back on. | |
|
|
|
14