Step 8
If you have checked the “Check Firmware Version” checkbox, then the utility will check the cur-
rent firmware that is on your KVM. If the current firmware is newer than the firmware that you wish to upgrade to, you will be prompted and asked if you wish to proceed. Simply click “Yes” to start the upgrade and “No” to cancel the upgrade.
Note: If you did not check the “Check Firmware Version” checkbox, utility will perform the upgrade automatically no matter what version of firmware you have in the KVM.
Step 9
When the firmware upgrade is done, you will see “Firmware upgrade OK” in the “Status Messages” window. Then simply click “Finish” to complete the whole firmware upgrade process.
Final Step
Now the KVM will reset by itself and it will be ready for usage after the reset.
23