Intermec user manual Cleaning the Scanner Window and CN2G Screen, To clean the scanner window

Chapter 4 — Troubleshooting and Maintaining the CN2G

Note: Date and time settings are not saved through a cold boot.

You will need to reset the time and date.

Cleaning the Scanner Window and CN2G Screen

To keep the computer in good working order, you may need to clean the scanner window.

Clean the scanner window as often as needed for the environment in which you are using the computer. To clean the CN2G, use a solution of ammonia and water.

There are no user-serviceable parts inside the CN2G. Opening the unit will void the warranty and may cause damage to the internal components.

To clean the scanner window

1Press and hold the Power key for approximately 2 seconds, and then release it to turn off the CN2G.

2Dip a clean towel or rag in the ammonia solution and wring out the excess. Wipe off the scanner window and screen. Do not allow any abrasive material to touch these surfaces.

3Wipe dry.

CN2G Handheld Computer User’s Manual 75