Chapter 3 — Developing and Installing Applications
Intermec recommends that you store your applications in a folder specific to your application underneath the \PROGRAM FILES folder. Intermec recommends that you store your application data in one of these locations on the CN2G:
•The SDMMC Disk folder
•The DiskOnChip folder
If you have an SD card inserted in your CN2G, it appears as the SDMMC Disk folder. This folder is the recommended location for placing your application install files.
The DiskOnChip folder is an area of storage that is part of the CN2G flash memory. This storage area is not deleted during a cold boot.
There are several ways you can install files and applications on the CN2G:
•ActiveSync
•SD Card
•Wavelink Avalanche
The following sections explain how to use each one of these processes to install your application on the CN2G.
Installing Applications Using ActiveSync
You can use ActiveSync to establish a connection between your PC and the CN2G. ActiveSync allows you to transfer files, synchronize files, perform remote debugging, and other device management activities. ActiveSync is a free application available from the Microsoft web site.
To establish a partnership between your PC and the CN2G, you need:
•a USB cable.
•a CN2 communications dock (P/N 074248).
•ActiveSync version 3.7.1 or later.
Installing ActiveSync and Establishing a Partnership
You can use a USB cable to establish your initial partnership between the CN2G and your PC.
54 | CN2G Handheld Computer User’s Manual |
