Configuring 802.11b/g Radio Communications | Intermec CN2G instruction

Chapter 2 — Configuring the CN2G

To use USB communications with your CN2G

1Connect the communications dock to the USB port of the other device using an appropriate USB cable.

2Make sure that your USB device is configured for USB communications.

3Insert the CN2G into the communications dock.

4Turn on the CN2G.

For more information about the communications dock, see the instructions that ship with the communications dock.

Configuring 802.11b/g Radio Communications

Make sure all components with antennas are at least 30 cm (1 ft) apart when power is applied. Failure to comply could result in equipment damage.

The wireless CN2G has an internal 802.11b/g radio to transfer data using wireless communications. This section of the manual assumes that you have already set up your wireless communications network including your access points. If you are using a UDP Plus network, you also need to have your Intermec Application Server communicating with a host computer.

Your CN2G supports these network protocols:

•TCP/IP

•UDP Plus

The next sections explain the parameters you need to configure for the CN2G to work in your wireless network.

CN2G Handheld Computer User’s Manual

29

Image 41

Intermec user manual Configuring 802.11b/g Radio Communications, To use USB communications with your CN2G

Contents

CN2G Handheld Computer CN2G Handheld Computer User’s Manual Version Date Description of Change Document Change Record CN2G Handheld Computer User’s Manual Contents Contents Troubleshooting and Maintaining the CN2G Contents Viii Before You Begin Safety Summary Global Services and Support Safety IconsWarranty Information Web Support Related Documents Who Should Read This Document?Patent Information Telephone Support Regex++, Index. Version 3.31, 16th Dec Other Copyright Information Using the CN2G Handheld Computer Introducing the CN2G Handheld Computer What’s New? Using the Battery To install and charge the battery Installing and Charging the Battery Battery To remove the battery Removing the Battery Checking the Battery Status Maximizing Battery LifeBattery Icon Status Icon Status To access functions printed on the keypad overlay Using the KeypadUsing the Power Key To turn off the CN2G Using the Touch ScreenUsing the Touch Screen and Stylus Understanding the Desktop Using ScanDemoFunctions You Can Perform With the Stylus To open ScanDemo To enable or disable symbologies Using Transcriber Calibrating the Screen Understanding the Screen IconsCN2G Screen Icons Icon Description To calibrate the screen Understanding the Status LightsUnderstanding the CN2G Status Lights Light Color Description Understanding the Beeps To change the beeper volumeScanning Bar Codes Understanding the CN2G Beeps To scan a bar code label with the CN2G 123456 To remove the SD card Using the SD Card To insert the SD card Install the battery door Using the CN2G Handheld Computer Configuring the CN2G Use Setup Assistant Use Intermec Settings Remotely How to Configure the CN2G Parameters Configuring the CN2G With the Setup Assistant To open Intermec Settings Configuring the CN2G Locally With Intermec Settings Configuring the CN2G Navigating in Intermec Settings Restoring Default SettingsTo restore default settings To Perform This Function Do This To exit Intermec Settings Configuring the CN2G Remotely With Intermec SettingsExiting Intermec Settings Configuring USB Communications Configuring the CN2G For Your Network To use USB communications with your CN2G Configuring 802.11b/g Radio Communications Configuring the Network Parameters for a TCP/IP Network To use wireless communications in a TCP/IP network Configuring the Network Parameters for a UDP Plus Network To use wireless communications in a UDP Plus network Configuring Security To select Funk security as your security choice Choosing Between Microsoft and Funk SecuritySelecting Funk as Your Security Choice To select a profile for Funk security Selecting a Profile for Funk Security Using WPA Security For Authentication, choose TTLS, PEAP, or TLS and tap Save Configuring WPA Security With Funk Security For Authentication, choose None and tap Save To enable WPA-PSK security on your CN2G with Funk security Configuring WPA Security With Microsoft Security Configuring the CN2G Using 802.1x Security Configuring 802.1x Security With Funk Security Configuring 802.1x Security With Microsoft Security Using Leap Security To enable Leap security on your CN2G Using Static WEP Security Configuring Static WEP Security With Microsoft Security Configuring Static WEP Security With Funk Security Select Enroll Certificates and tap the Run App button Loading Certificates Configuring the CN2G Configuring the CN2G Disabling Security To disable security Developing and Installing Applications Developing a New Application Developing Applications for the CN2G To open Microsoft Internet Explorer Installing Applications on the CN2GDeveloping a Web-Based Application Installing ActiveSync and Establishing a Partnership Installing Applications Using ActiveSync To install ActiveSync and establish a partnership Using ActiveSync to Copy Files and Install Applications To install an application on the CN2G using ActiveSync Installing Applications Using Wavelink Avalanche Installing Applications Using Your SD CardTo install applications using the SD card To use Avalanche to remotely manage the CN2G Launching Your Application Automatically Upgrading the Operating System Using an SD CardUpgrading Your CN2G Upgrading the Operating System To upgrade the operating system To remotely upgrade a CN2G using Intermec Settings Upgrading the Persistent Storage Manager Files To upgrade the PSM files Developing and Installing Applications Developing and Installing Applications Troubleshooting and Maintaining the CN2G Problems While Operating the CN2G Problems and SolutionsProblem Solution Problems While Operating the CN2G Problems While Configuring Security Problems While Configuring Security Problem Solution Problems With Wireless Connectivity You may have gone out of range of an access point Problems With Wireless Connectivity Problems While Scanning Bar Codes Problems While Scanning Bar Codes To warm boot the CN2G using the Warm Boot button Booting the CN2GWarm Booting the CN2G To cold boot the CN2G Cold Booting the CN2GTo warm boot the CN2G using the Power key To clean the scanner window Cleaning the Scanner Window and CN2G Screen Troubleshooting and Maintaining the CN2G Appendix Physical and Environmental Specifications Accessories for the CN2G Default Communications Configuration Default ConfigurationDefault Scanner Configuration UDP Plus Settings Default Value Name Servers Settings Default ValueRadio Settings Default Value Device Settings Default Value Default Device Settings Configuration Index CN2G Symbols and Numbers Manual Index TCP/IP Index Page 074751-002