IOGear GCS1794, M1085, M1086, GCS1792 manual Firmware Upgrade

Page 27

Firmware Upgrade

Note: In order to perform a firmware upgrade, you need to use a computer that’s not connected to the KVM.

Step 1

Connect the provided firmware upgrade cable to the firmware upgrade port of the KVM and the serial port of your computer. Connect power adapter to your power outlet and the KVM.

Step 2

Go to www.iogear.com to download the latest available firmware or the specific firmware that you wish to upgrade to.

Step 3

Shut down all the computers that are connected to the KVM. Then Invoke Firmware Upgrade Mode. (Please refer to Hotkeys Setting Mode section.)

Step 4

Extract the file with WinRAR or compatible software. Then double click on the execute file to begin with the Firmware Upgrade Utility.

27

Image 27
Contents Installation Guide Page Page Package Contents Requirements Table of Contents Front View GCS1792 OverviewRear View GCS1794 Overview Firmware Upgrade Port CPU3 Mic. Port DC Power Jack Page Installation Step Step Final Step LED LED IndicationPort Switching via Front Panel Pushbutton Port SwitchingPage Port Switching via Hotkeys Port Switching via HotkeysU Enter Switch KVM and USB focus to port n Auto Scanning Invoke HSM, then press F4 Hotkey Setting Mode HSMPage Mac Keyboard Emulation Alt Print Screen F13 Scroll Lock F14 Enter Factory Default Hotkeys Settings Firmware Upgrade Page Page Page Page Upgrade Fail Page Federal Communications Commission FCC Statement Page CE Statement Limited Warranty Contact Page About Us