IOGear M1086, M1085, GCS1792, GCS1794 manual

Page 33

Step 3

Now plug the DC connector back into the DC jack from the KVM. This will restore the KVM with factory default firmware.

Step 4

Perform the firmware upgrade again.

Step 5

When the firmware upgrade is completed, unplug the DC connector from the KVM. Then remove the jumper from J11 (for GCS1792) / J17 (for GCS1794) and put the housing back together.

Final Step

Plug DC connector back into the KVM, then the KVM will be ready for usage again.

33

Image 33
Contents Installation Guide Page Page Package Contents Requirements Table of Contents Front View GCS1792 OverviewRear View GCS1794 Overview Firmware Upgrade Port CPU3 Mic. Port DC Power Jack Page Installation Step Step Final Step LED LED IndicationPort Switching via Front Panel Pushbutton Port SwitchingPage Port Switching via Hotkeys Port Switching via HotkeysU Enter Switch KVM and USB focus to port n Auto Scanning Invoke HSM, then press F4 Hotkey Setting Mode HSMPage Mac Keyboard Emulation Alt Print Screen F13 Scroll Lock F14 Enter Factory Default Hotkeys Settings Firmware Upgrade Page Page Page Page Upgrade Fail Page Federal Communications Commission FCC Statement Page CE Statement Limited Warranty Contact Page About Us