American Standard 4114.100 installation instructions Installation LAKELAND Instructions

Installation

LAKELAND Instructions

SINGLE CONTROL KITCHEN

4114.100

PULL-OUT FAUCET with EverClean™ Finish

Congratulations on purchasing your American Standard faucet with EverClean finish found only on American Standard faucets.

EverClean Finish

•One wipe effortlessly removes spots

•Eliminates the need for cleaners and scrubbing

•Permanent surface protectant remains beautiful for the life of the faucet

Certified to comply with ANSI A112.18.1M

.      
3 & 7 
  

•EverClean™ available on: Polished Chrome, Satin Nickel, Stainless Steel, Polished Brass (or any combination of these finishes)

To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin.

TOOLS REQUIRED

3FHVMBS 4DSFXESJWFS	Phillips Screwdriver
	Adjustable Wrench
	Plumbers' Putty or Caulking

INSTALL FAUCET WITH OR WITHOUT DECK ESCUTCHEON

	CAUTION	Turn off hot and cold water
		supplies before beginning.

(A) Installation with ESCUTCHEON (1). Apply a bead of putty to bottom edge of ESCUTCHEON with PUTTY PLATE (1). Insert supply HOSES (2) and SHANK (3) through hole of ESCUTCHEON with PUTTY PLATE (1) and mounting surface. Follow mounting instructions below to secure faucet to mounting surface.

(B) Installation less ESCUTCHEON (1). Discard ESCUTCHEON with PUTTY PLATE (1). Insert supply HOSES (2) and SHANK (3) through mounting hole and seat SPOUT BASE onto sink or mounting surface. Do not use putty.

Assemble RUBBER WASHER (4), BRASS WASHER (5), and threaded LOCKNUT (6) onto SHANK (3) from underside of sink or mounting surface. Hand tighten LOCKNUT (6) and check that rotation of HANDLE (7) from HOT to COLD is centered.

Use a screwdriver to tighten SCREWS (8) on LOCKNUT (6). Work your way around LOCKNUT (6), tightening the screws slightly each time until all are snug to ensure even pressure.

7	7
A	B

SPOUT BASE

1

3

2

P U T T Y

2

3

4

5

8 6

SINK OR

MOUNTING

SURFACE

4

5

8 6