KTI Networks KGD-600 manual Quality of Service, QoS Configuration Description

Page 41

4.7 Quality of Service

QoS Configuration	Description

Port	Port number
802.1p	802.1p priority classification
	Enable - set to enable this classification to the port for priority-tagged and
	VLAN-tagged packets
	Disable - 802.1p classification is not applied to the port
DSCP	DSCP classification
	Enable - set to enable DSCP classification to the port for IP packets
	Disable - DSCP classification is not applied to the port
Port Priority	Port default priority class, it is used as a port-based QoS mode when
	802.1p and DSCP classifications are disabled. It is also used as default
	priority class for the received packet when both 802.1p and DSCP classifi-
	cation failed in classification.
	Class 3 ~ Class 0 - priority class

[802.1p Mapping]	Click to configure 802.1p mapping tables.
[DSCP Mapping]	Click to configure DSCP mapping table.
[Service Policy]	Click to configure per port egress service policy mode.
[Apply]	Click to apply the configuration change
[Refresh]	Click to refresh current configuration

Note:

802.1p classification is superior over DSCP classification if both are enabled. That means if a received packet is classified successfully in 802.1p classification, the classified priority class is used directly for the packet and the result of DSCP classification is ignored.

-41-

Image 41

Contents KGD-600 Page Trademarks Table of Contents Appendix. Factory Default Settings Plug and Play Quality of ServiceFiber Connectivity Web ManagementIndustrial Features FeaturesBasic functions Management functionsProduct Panels Specifications LED IndicatorsSoftware Management Functions DC Power InputMechanical EnvironmentalUnpacking Safety CautionsMounting the Switch on a Wall Din-Rail Mounting Panel Mounting Using Terminal Blocks Applying PowerOperation Function Reset ButtonUsing DC Power Jack Making UTP Connections Port Configuration ManagementNetwork Cables Auto MDI/MDI-X FunctionMaking Fiber Connection Installing SFP Fiber TransceiverConnecting Fiber Cables Function State Interpretation Configuring IP Address and Password for the SwitchLED Indication #of bits Frame field AbbreviationUser priority Pvid Port VIDQoS Function Priority Class Queues Egress Service PolicyPacket Priority Classification Keep Tag Per port setting 2.1 802.1Q Tag Aware Per port settingVlan Function Vlan OperationDrop Tag Per Port Setting Drop Untag Per Port SettingIngress Default Tag Per Port Setting Packet Tag InformationPacket Forwarding Vlan Group Table ConfigurationVlan Classification Summary of Vlan Function Egress SettingsEgress Tagging Rules 802.1X Authentication Port Access Control Start Browser Software and Making Connection Login to the Switch UnitWeb Browser Set IP Address for the System UnitMaintenance ConfigurationMain Management Menu MonitoringSystem Configuration DescriptionSummary of the rules Management VlanPorts Configuration FunctionVLANs Vlan Configuration DescriptionPort-based Vlan Mode Example Port-based Vlan ISP ModeMode Operation Advanced Vlan Mode Ingress Default Tag Ingress Settings Received packet type Tag Aware =Tag-ignore Vlan Groups Double Tagged in Advanced Vlan Mode Important Notes for Vlan ConfigurationSwitch Vlan Mode selection QoS Configuration Description Quality of ServiceClass 3 ~ Class 1 802.1p MappingDscp Mapping Weighted ratio priority Class 3210 = 1111 weighted ratio QoS Service PolicyPort Mirroring Radius IP 802.1X Configuration1 802.1X Re-authentication Parameters Statistics Restore Default Reboot SystemUpdate Firmware / Configuration Update FirmwareLogout Upload Configuration FileBackup Configuration File Ports Configuration System ConfigurationVlan Configuration Port-based Vlan Mode settingQoS 802.1p Mapping Quality of Service ConfigurationPort Mirroring Configuration QoS Service Policy802.1X Configuration QoS Dscp Mapping

Related manuals

Manual 2 pages 18.65 Kb