IOGear GUWH104KIT manual

Page 31

When printing to the printer when it is connected to the Wireless USB Hub, verify that the correct printer is being selected in the printer options window by selecting the correct model name to print to.

11.Problem: The IOGEAR Wireless USB Hub does not show up in the Console window when connected wirelessly to the Wireless USB Host Adapter.

Solution: Verify that the hub icon at the bottom of the Console window is highlighted in orange. If the hub icon is grayed out, click on the icon so that the Wireless USB Hub will be displayed. You can also click on the “+ View All” button to make all devices visible when connected.

12.Problem: The throughput of USB Hard Drive or USB Flash drive is less when plugged in the Wireless USB Hub than when plugged directly to the PC.

Solution: Due to the protocol overhead of Wireless USB, you will experience a slower throughput wirelessly than over a wired connection.

31

Image 31 IOGear GUWH104KIT manual
Contents Installation Guide Page Welcome Table of Contents Introduction Features Requirements Package Contents Device Overview Active Host LEDs Switch Power LEDInstallation Hardware Preparation Important Note Software InstallationPage Page Page Page After the software has fully installed, restart the PC Driver Installation Step Step Step Page Page Page Advanced Settings Page Page Frequently Asked Questions Problem Host LED blinking on the Wireless USB Hub Page Page Technical Support Page Limited Warranty Federal Communications Commission FCC Statement IOGEAR, INC ContactPage FUN