IOGear GCS82B/GCS84B user manual Auto Scan Mode

Operation

Auto Scan Mode

The MiniView™ SE KVM’s auto scan feature automatically switches between the connected CPUs at regular 5-second intervals so that you can monitor their activity without having to switch the ports yourself.

(GCS82B) To invoke the Auto Switch feature press and release the left shift key then do the same with the right shift key in succession of each other.

(GCS84B) To invoke the Auto Switch feature perfom the following key sequence:

•Press each of the following keys, in order, holding them down until all three are depressed. [Alt+Ctrl+Shift]

•Key in the port number (0)

•Press [Enter] to complete your selection

Once scanning begins it will continue until you press the [spacebar]. The port last seen during the scan will become the active port.

Note: While Auto Scan Mode is in effect none of the keyboard keys will function until you press the [spacebar] to end the Auto Scan

13