KTI Networks 221TX/3 manual Appendix, A1. Specifications

Page 21

Appendix

A1. Specifications

Network std.: 10 MbpsIEEE 802.3 10BASE-T Ethernet

100 Mbps IEEE 802.3u 100BASE-TX Fast Ethernet

Speed : Auto-sense, auto-negotiation, 10Mbps, 100Mbps

Duplex : Auto-negotiation, Half-duplex and full-duplex

Bus Interface: PCI 2.0 or later

Network Cable: 10Mbps Category 3, 4, or 5 UTP (100 meters) 100Mbps Category 5 UTP (100 meters)

Wake on LAN: 3-Pin Wake on LAN connector

One Wake on LAN cable

Boot ROM: 128KB boot ROM socket

Dimensions: 59mmx130mm (2.32"x5.12")

Environmental: Operating temperature 0o to 40oC Humidity 10% to 90% non-condensing

Power:

+5V 1A

17

Image 21
Contents 10/100 Fast Ethernet Adapters Page Trademarks Figures Introduction Adapter FeaturesComponents Description Connectors and LEDsShows the connector and LEDs on the bracket Wake on LAN Technology Page Installing the Adapter Installing the AdapterInserting the Adapter into the PCI Slot Installing Wake on LAN CableInstalling WOL Cable Connecting to the Network Mbps Connection Connecting 100BASE-TX Cable Driver Information Network Driver InstallationBios Setup Check Device Manager in System Properties window Installation for Windows 98 SystemPing Command Interpretations LED IndicatorsAppendix A1. SpecificationsAuto-negotiation Function Installing Remote Boot ROM