KTI Networks 221TX/3 manual Ping Command

Page 19

The adapter name shown in Device Manager should be "KF221TX Fast Ethernet PCI Adapter". The installation is proper if there is no "?" or "!" mark ahead of the adapter line.

2.If you are using TCP/IP protocol, you can use Ping command under DOS mode to check the adapter itself. The command is

>ping 127 . 0 . 0 . 1

Figure 4-2 Ping Command

Image 19

Contents 10/100 Fast Ethernet Adapters Page Trademarks Figures Introduction Adapter FeaturesComponents Description Connectors and LEDsShows the connector and LEDs on the bracket Wake on LAN Technology Page Installing the Adapter Installing the AdapterInserting the Adapter into the PCI Slot Installing Wake on LAN CableInstalling WOL Cable Connecting to the Network Mbps Connection Connecting 100BASE-TX Cable Driver Information Network Driver InstallationBios Setup Check Device Manager in System Properties window Installation for Windows 98 SystemPing Command Interpretations LED IndicatorsAppendix A1. SpecificationsAuto-negotiation Function Installing Remote Boot ROM