User Manual KVM LCD Terminal
KVM LCD Terminal INSTALLATION
INSTALLING THE DRAWER INTO A 19” CABINET
1.Fix the front side panel of the drawer onto the front side of your 19” cabinet
2.Fix the screws in the back onto the rear side of your 19” Cabinet. The mounting rails may be adjusted to fit different cabinet depths of between 52cm and 90cm
Cable connections
1.Ensure the computer or KVM switch you are connecting to is switched OFF!
2.Attach suitable KVM cables to the control ports of your computer or KVM switch
3.Connect the external power supply to the KVM LCD Terminal
4.Switch ON the power to the KVM LCD Terminal
5.Switch ON the power to the connected PC or KVM switch
1