Allied Telesis AT-2911GP/SXLC manual Installing a Network Adapter Card, Removing the PC Cover

AT-2911GP Gigabit Fiber Ethernet PoE+ Adapters Installation and User’s Guide

Installing a Network Adapter Card

The following instructions apply to installing an AT-2911GP adapter card in most systems. Refer to the manuals that were supplied with your system for details about performing these tasks on your particular system.

To install the network adapter card, perform the following procedure:

1.Review the “Pre-Installation Checklist” on page 27 and “Reviewing Safety Precautions” on page 25.

Before installing the adapter card, ensure the system power is OFF and unplugged from the power outlet, and that proper electrical grounding procedures have been followed.

Warning

High voltage inside the system presents a safety hazard. Make sure the power is off before removing the cover.

2.Remove the system cover and select any empty PCIe slot. See Figure 11.

If you do not know how to identify a PCIe slot, refer to your system documentation.

Figure 11. Removing the PC Cover

30