Chapter 6: Modifying Advanced Properties
3.Select one of the following options:
Rx & Tx Enabled — Enables the TCP/UDP Checksum Offload (IPv6) function for both receiving and transmitting IPv6 packets. This is the default setting.
Disabled — Disables the TCP/UDP Checksum Offload (IPv6) function for both receiving and transmitting.
Rx Enabled — Enables the TCP/UDP Checksum Offload (IPv6) function only for receiving IPv6 packets.
Tx Enabled — Enables the TCP/UDP Checksum Offload (IPv6) function only for transmitting IPv6 packets.
4.Click OK.
