Chapter 6: Modifying Advanced Properties
Flow Control
The Flow Control feature allows you to control the flow between the
To enable or disable the Flow Control feature, do the following:
1.Access the Advanced Properties.
See “Accessing Advanced Properties” on page 87.
2.Select Flow Control in the Property box.
The Flow Control page is displayed as shown in Figure 64.
Figure 64. Flow Control Page
3. Select one of the following options if available:
Note
The options and default setting depend on your operating system and the version of the driver that you installed.
Auto — Receiving and transmitting PAUSE frames are optimized.
Disabled — The adapter ignores PAUSE frames.
97
