Allied Telesis AT-2911GP/LXLC manual Checking the Port LED on the Adapter, State Description

AT-2911GP Gigabit Fiber Ethernet PoE+ Adapters Installation and User’s Guide

Checking the Port LED on the Adapter

The AT-2911GP adapter card comes with two LED’s. One LED indicates the link status for the copper port; the other indicates the link status for the fiber optic port.

Note

Before the port LED can provide troubleshooting information, the driver software for your particular operating system must be installed and the adapter must be connected to the network. See Chapter 3, “Installing the Driver Software” on page 35.

Table 8 describes the link status that LED’s indicate.

	Table 8. LED Status
State	Description
On	Valid link.
Off	No link.
Flashing	The port is receiving or transmitting network packets

140