AT-2911GP Gigabit Fiber Ethernet PoE+ Adapters Installation and User’s Guide

Locally Administered Address

Guidelines for Assigning a Locally Administered Address

Assigning the

Locally

Administered

Address

The Locally Administered Address allows you to replace the MAC address originally assigned to the adapter with a user-defined address. The user- defined address that you assign to the adapter is called a locally administered address.

Caution

A locally administered address overrides the original MAC address stored in the AT-2911GP series adapter card. When you change the MAC address, ensure that a unique MAC address is assigned.

Here are guidelines for assigning a locally administered address:

The address must be unique.

The address consists of a 12-digit hexadecimal number, for example, “020C46005501.”

The address must start with “02” in the most significant byte, for example, “020304050607.”

Do not assign “0000 0000 0000” or “FFFF FFFF FFFF.”

The range is from 0200 0000 0000 to 02FF FFFF FFFF.

To assign or change the Locally Administered Address, do the following:

1.Access the Advanced Properties.

See “Accessing Advanced Properties” on page 87.

2.Select Locally Administered Address in the Property box.

The Locally Administered Address page is displayed as shown in Figure 72 on page 109.

108

Page 108
Image 108
Allied Telesis AT-2911GP/LXLC, AT-2911GP/SXSC, AT-2911GP/SXLC Select Locally Administered Address in the Property box