Lindy 52022 Configuration / Installation, Rear view of your W-LAN 11 Access Point, Description

Page 3

English Short Manual

Rear view of your W-LAN 11 Access Point:

100M TX

POWER Link RX

MDI

OR

MDI-X

RS-232

Power: Connect the power adaptor here.

MDI: RJ-45 connector for Ethernet Hub with10BaseT or 100BaseTX.

MDI-XRJ-45 connector to connect a computer or workstation, you can only use one of the MDI / MDI-X marked connectors!

RS-232Console port to configure and program the Access Point

LED’s status display for the wired Ethernet

After correct installation of all connections to the wired LAN the Link LED should always light green when the hub or the workstation/computer is switches on.

The top panel of the W-LAN 11 Access Point

The following table provides an overview of each LED activity:

LED Definition

PWR

AP

WLAN

LAN

LINK

Activity

Continuous Green

Continuous Green

Flashing Green

Flashing Green

Continuous Green

Description

Power enabled

The W-LAN 11 is now in service.

Off: No wireless activity

Flashing: Wireless RX/TX activity

Off: No Ethernet traffic activity

Flashing: Wired LAN traffic activity

Off: no station connected to the Access Point

On: with one or more stations associated to the W-LAN 11

3. Configuration / Installation

The Access Point provides a user friendly configuration utility (Access Point Manager). It is delivered ready for use with factory default settings for use with standard W-LAN conditions. Any configuration changes may be made using the Access Point Manager software, by web browser administration or by console set-up using either the RS-232 console administration or direct Ethernet Telnet connection.

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Italiano EnglishDeutsch FrançaisHardware Installation English Short ManualIntroduction Description Configuration / InstallationRear view of your W-LAN 11 Access Point Top panel of the W-LAN 11 Access PointAccess Point Manager Configuration Utility General ConfigurationWeb Management Utility Administration via RS-232 console program or Telnet TCP/IPDescription/Action TroubleshootingInstallation der Hardware Deutsches KurzhandbuchEinleitung Die Rü ckseite des W-LAN 11 Access Point Die Oberseite des W-LAN 11 Access PointInbetriebnahme / Konfiguration Access Point Manager Konfigurationsprogramm Konfiguration Administration ü ber das Konsolenprogramm bzw. RS-232 Beschreibung/Massnahme FehlersucheManuel condensé en franç ais Installation maté rielleInfrastructure sans fil Wireless Placement du point d’accè sLe panneau frontal du point d’accè s W-LAN Vue arriè re de votre point d’accè s W-LANUtilitaire de configuration Access Point Manager Contrô le d’accè s Utilitaire Web Administration par une console RS-232 ou Telnet TCP/IPRetournez le produit à votre fournisseur Problè mes techniquesInstallazione Hardware Estratto del Manuale in ItalianoIntroduzione Configurazione / Installazione La parte superiore del panello dell’W-LAN 11 Access PointDescrizione Configurazione delle Utility da Access Point Manager Generale ConfigurazioneTechnical Data / CE Declaration of Conformity Utilità Web ManagementAmministrazione tramite console RS-232 o Telnet TCP/IP Descrizione/Azione Soluzione ai ProblemiEinschrä nkungen / Limitations Product Lindy W-LAN 11 Wireless LAN Access Point
Top Page Image Contents