Other Suspend/Resume Issues
Other issues you should consider when suspending or resuming pen tablet operation are as follows:
•When the Point 510 pen tablet is in suspend mode, data stops going to and from the pen tablet. Some programs might temporarily keep the Point 510 pen tablet in the Fully On state to prevent interrupting processes like data transfer until the data is completely transferred. This preserves the quality and completeness of the data.
•Your system may be set up to suspend operation automatically if you do not use the system for some period.
•If the battery charge drops below the critically low charge level (the amber Low Battery light is flashing quickly), the system is forced into suspend mode and will not resume until a charged battery pack is installed or external power is attached.
•The Point 510 Power button is not pressure sensitive. If the pen tablet does not go into Suspend mode (or Fully Off) within a few seconds, do not press the button harder. Pressing the button harder may damage the pen tablet.
•When the Point 510 pen tablet shuts down, it emits a beep (if the speaker is on). This lets you know that it is going into the Fully Off state.
Charging the Battery Pack
The Point 510 battery pack can be charged while it is installed in the Point 510 pen tablet. You can use the pen tablet, or press the Power button to suspend or turn off the pen tablet, without interrupting the charging process.
Using the Point 510 Pen Tablet |