Elo TouchSystems ET2039L manual Interface Connection, Connector Panel on Rear side of Monitor

Page 8

Interface Connection

Interface Connection

Connector Panel on Rear side of Monitor

Power Cable Serial Cable (not	Power OSD box USB cable	DVI-D cable	Analog Video
included with	Button connector	(not included with	Cable
ET2039L-Axxx		ET2039L-xxxx-x-
models)		A-x models)

To connect your touchmonitor to your computer:

1Connect the power cable to the rear panel of the monitor and the other end to the power outlet.

2Connect either the USB cable OR the serial cable to the rear panel of the monitor. Note: Do not use both. Connect the other end to your computer.

3Connect the video cable and/or the DVI-D cable to the rear panel of the monitor. Tighten by turning the two thumb screws clockwise to ensure proper grounding. Connect the other end to your computer.

4Connect the OSD control box to the monitor.

5Press the power button on the rear panel to turn the monitor on.

Elo TouchSystems ET2039L User Guide 8

Image 8

Contents ET2039L 20” LCD Touchmonitor User Guide Revision D Elo TouchSystems ET2039L 20” Touchmonitor User GuideCopyright 2008 Tyco Electronics. All Rights Reserved DisclaimerTrademark Acknowledgments Elo TouchSystems ET2039L User GuideTable of Contents Chapter 2 Installation And SetupChapter 4 Troubleshooting Appendix A Touchmonitor SafetyC H A P T E R INTRODUCTIONAbout the Product INSTALLATION AND SETUP Unpacking Your Touchmonitor Check that the following items are present and in good conditionTo connect your touchmonitor to your computer Interface ConnectionConnector Panel on Rear side of Monitor Installing the Touch Driver If the AutoStart feature is not active Rear View of Monitor-Portrait Orientation Monitor Mounting OrientationRear View of Monitor-Landscape Orientation Landscape Mounting Orientation Angle Views 90º 90ºPortrait Mounting Orientation Angle Views About Touchmonitor Adjustments OPERATION1 AUTO/SEL select 2 DOWN 3 UP 4 MENU OSD Menu Functions On-Screen Display OSD Control BoxOSD Control Buttons Power Lock/Unlock OSD Lock/UnlockOSD Control Options Recall Defaults Recall Recall ColorMiscellaneous Sharpness Display InformationPreset Display Modes TROUBLESHOOTING Solutions to Common ProblemsProblemSuggestions Refer to the On-Screen Display OSDTOUCHMONITOR SAFETY APPENDIXCare and Handling of Your Touchmonitor Waste Electrical and Electronic Equipment WEEE DirectiveTECHNICAL SPECIFICATIONS ET2039L Speciﬁcations Video Signal Connector Power InputDimensions HxWxD WeightET2039L 20” LCD Touchmonitor Dimensions II. Emissions and Immunity Information REGULATORY INFORMATIONI. Electrical Safety Information B Notice to Users in Canada This equipment complies with the Class A limits for radio noise emissions from digital apparatus as established by the Radio Interference Regulations of Industry Canada a Verify as an emission source by turning the equipment off and on III. Safety Label WARRANTY Product less depreciation calculated on a straight-line basis over Seller’s stated Warranty Period Check out Elo’s Website Get the latest Product information SpeciﬁcationsNews on upcoming events Press release Software drivers Touch Monitor Newsletter