Elo TouchSystems ET2039L manual Installing the Touch Driver

Page 9

Installing the Touch Driver

Your Elo touchmonitor is Plug-and-Play compliant. Information on the video capabilities of the touchmonitor is sent to the video display adapter when Windows starts. If Windows detects the touchmonitor, follow the instructions on the screen to install a generic Plug-and-Play monitor.

Elo TouchSystems provides touch driver software that allows your touchmonitor to work with your computer. Drivers are located on the enclosed CD for the following operating systems:

•Windows XP

•Windows 2000

•Windows Me

•Windows 98

•Windows 95

•Windows NT 4.0

The latest versions of drivers and driver information for other operat- ing systems are available on the Elo TouchSystems web site at www.elotouch.com/support/downloads/.

To install the Touch Driver for Windows XP, Windows 2000, Me, and 98, follow the steps below:

NOTE: For Windows XP and Windows 2000 you must have administrator access rights to install the driver.

1Insert the Elo CD-ROM in your computer’s CD-ROM drive.

If Windows XP, Windows 2000, Windows 98, or Windows Me start the Add New Hardware Wizard, follow these steps (if it does not open, follow steps 1a through 2a):

Elo TouchSystems ET2039L User Guide 9

Image 9

Contents ET2039L 20” LCD Touchmonitor User Guide Elo TouchSystems ET2039L 20” Touchmonitor User Guide Revision DDisclaimer Copyright 2008 Tyco Electronics. All Rights ReservedTrademark Acknowledgments Elo TouchSystems ET2039L User GuideChapter 2 Installation And Setup Table of ContentsChapter 4 Troubleshooting Appendix A Touchmonitor SafetyINTRODUCTION About the ProductC H A P T E R INSTALLATION AND SETUP Check that the following items are present and in good condition Unpacking Your TouchmonitorInterface Connection Connector Panel on Rear side of MonitorTo connect your touchmonitor to your computer Installing the Touch Driver If the AutoStart feature is not active Monitor Mounting Orientation Rear View of Monitor-Landscape OrientationRear View of Monitor-Portrait Orientation 90º 90º Landscape Mounting Orientation Angle ViewsPortrait Mounting Orientation Angle Views OPERATION About Touchmonitor AdjustmentsOn-Screen Display OSD Control Box OSD Control Buttons1 AUTO/SEL select 2 DOWN 3 UP 4 MENU OSD Menu Functions OSD Lock/Unlock Power Lock/UnlockOSD Control Options Recall Recall Color Recall DefaultsMiscellaneous Sharpness Display InformationPreset Display Modes Solutions to Common Problems TROUBLESHOOTINGProblemSuggestions Refer to the On-Screen Display OSDAPPENDIX TOUCHMONITOR SAFETYWaste Electrical and Electronic Equipment WEEE Directive Care and Handling of Your TouchmonitorTECHNICAL SPECIFICATIONS ET2039L Speciﬁcations Power Input Video Signal ConnectorDimensions HxWxD WeightET2039L 20” LCD Touchmonitor Dimensions REGULATORY INFORMATION I. Electrical Safety InformationII. Emissions and Immunity Information B Notice to Users in Canada This equipment complies with the Class A limits for radio noise emissions from digital apparatus as established by the Radio Interference Regulations of Industry Canada a Verify as an emission source by turning the equipment off and on III. Safety Label WARRANTY Product less depreciation calculated on a straight-line basis over Seller’s stated Warranty Period Get the latest Product information Speciﬁcations Check out Elo’s WebsiteNews on upcoming events Press release Software drivers Touch Monitor Newsletter