Touchmonitor Safety

A P P E N D I X

This manual contains information that is important for the proper setup and maintenance of your industrial touchmonitor. Before setting up and powering on your new touchmonitor, read through this manual, especially Chapter 2 (Installation), and Chapter 3 (Operation).

1To reduce the risk of electric shock, follow all safety notices and never open the touchmonitor or brick supply case.

2Turn off the product before cleaning

3Your new brick supply is equipped with a 3-wire, grounding power cord. The power cord plug will only fit into a three-prong safety ground outlet. Do not attempt to fit the plug into an outlet that has not been configured for this purpose. Do not use a damaged power cord. Use only the power cord that comes with your Elo TouchSystems touchmonitor. Use of an unauthorized power cord may invalidate your warranty.

4The slots located on the sides and top of the brick supply and touchmonitor case are for ventilation. Do not block or insert anything inside the ventilation slots.

5It is important that the brick supply and the rear portion of your touchmonitor remain dry. Do not pour liquid into or onto your brick supply or touchmonitor. If your brick supply or touchmonitor become wet do not attempt to repair them yourself.

B-23