Linksys EFVCD20 manual Copy, Shutdown

EtherFast Series Instant GigaCD Server

Copy

This information will set the default destination for CD images copied from the Server.

•Select Disk Select the drive you wish to use as the default destination.

•Cabinet Name Enter the name of the cabinet you wish to use as the default destination. If no such cabinet exists, it will be created.

•Image Name Enter a name here to be used as a default Image Name. This will be used only in the event that the “Volume Name” on the CD is blank.

•Copy image in compressed mode Check this box to enable and saved cd images will be compressed, if possible. However, if the cd image is compressed, file sharing is NOT possible, because the compressed file can not be read by other PCs.

E-Mail

If enabled, this will send an E-Mail in the event of a problem or error.

•Enable E-Mail Notification of Problems This must be checked for E-Mails to be sent. At least one E-Mail address must be provided.

•E-Mail Address Enter from one to three E-Mail addresses in these fields to which any messages will be sent.

•Subject (optional) This text will be used as a default “Subject” line for any E-Mail messages.

Shutdown

From here, you can shut down or reboot the Server or set a shutdown sched- ule. After a shutdown, you must manually switch the Server back ON.

14 15