| EtherFast Series |
Start IP Address | This is the first value for the IP Addresses allocated by |
| the DHCP Server. |
Finish IP Address | This is the final value for the IP Addresses allocated by |
| the DHCP Server. The range between the Start IP |
| Address and Finish IP Address should be large enough |
| to hold all of the DHCP Clients. |
Press Next to continue.
Microsoft Networking:
Workgroup Name This name should correspond with the name used by the PCs on your LAN.
Code Page | You will want to select the appropriate region within |
| which you are running the Server. |
6.Click “Finish” to save and exit. The Instant GigaCD Server is now opera- tional.
Instant GigaCD Server
Using the EtherFast Instant GigaCD Server
Server Administration
1.Start up the Instant GigaCD Manager Utility. It will automatically scan the network for the Server and then the main screen will appear.
2.In the left panel, you will see a display of the Servers currently connected to your network. Click on that Server that you wish to access. You will be prompted for a password if one has been set.
3.Once the Server is selected, the cabinets within will be listed and the main panel (on the right) will display the cd images within a selected cabinet.
Note: If using Windows 2000, you can NOT select the number of Virtual Drives to be created, or the drive letter used.
10 | 11 |