Elo TouchSystems AMM170TK, AMM18TK User Controls, Front Panel Controls, Standard OSD Operation

Page 16

16User’s Guide

USER CONTROLS

Front Panel Controls

1.

Power LED:

Lights up to indicate the power is turned ON.

2.

Power Switch:

To turn ON or OFF the power.

3.

+:

To increase the value of the parameter in the OSD you have selected for adjustment.

 

 

To increase the brightness directly when OSD menu is not activated.

4.

-:

To decrease the value of the parameter in the OSD you have selected for adjustment.

 

 

To increase the brightness directly when OSD menu is not activated.

5.

Select Up:

To enter OSD menu then can use as moving upward in the OSD menu.

6.

Select Down:

To move downward in the OSD menu.

 

 

Switch PC display to Video display and vice versa by one touch when OSD menu is not activated.

7. Auto Button:

One touch Auto adjust or Exit OSD menu.

Standard OSD Operation

1.Press menu button to activate the OSD.

2.Use Select Up or Down keys to move up or down through the menu. The parameter will be highlighted wehn selected.

3.Then use + or - to increase or decrease the value of the parameter, or make selection between different options.

4.To quit the OSD screen at any time during the operation, press Auto button. If no keys are pressed for a time period, the OSD automatically disappears.

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Revision Control RevTable of Contents Screen Adjustment Procedure To change the resolution to its factory recommended presetPress Properties to execute the Display Properties To change the resolution to its factory recommended preset Press the Auto button on the monitor Features IntroductionUnpacking Symbol Explanations EU Declaration of Conformity for Medical Applications Screen Position Adjustment Safety Precaution Cleaning Your MonitorPreset Modes Ode Resolution H x Freq. KHz Freq. HzPower Management Function Stand-by ModeSuspend Mode Off ModeDDC InstallationSteps Connecting to a Television Signal Video and SoundFront Panel Controls User ControlsStandard OSD Operation OSD Scren Basic Section VGA Execute Recall Factory Default OSD Scren Basic Section DVI Push the select button to execute Recall OSD Scren Basic Section C-Video or S-Video Push the select button to execute Information OSD Function Description Under Analog Display DpmsOSD Function Description Under Digital Display Ite m Function D e s criptionOSD Function Description Under C-Video or S-Video Display DP M STroubleshooting LED OFFSpecification AMM170TKAMM17TK AMM18TK AMM19TK AMM19TK/HB Video Input ConnectorsTouch Port Commencement and Duration of Warranty Place of Repair or ReplacementLimitation of Warranty Touch ScreenInstallation Technical Assistance ServiceQuick Start Touchmonitor installation Cable Connection AMM170TK/AMM17TK/AMM18TK/AMM19TK/AMM19TKHB
Top Page Image Contents