Elo TouchSystems AMM17TK, AMM170TK, AMM18TK, AMM19TK manual Safety Precaution, Cleaning Your Monitor

Page 11

AMM170TK/AMM17TK/AMM18TK/AMM19TK/AMM19TK(HB) 11

SAFETY PRECAUTION

Avoid placing the monitor, or any other heavy object, on the power cord to prevent fire or electrical shock from damage to the power cord.

Do not expose the monitor to rain, excessive moisture, or dust to avoid fire or shock hazard.

Do not cover the slots or openings of the monitor for proper heat dissipation. Always put the monitor in a place where there is adequate ventilation.

Avoid placing the monitor against a bright background or where sunlight or other light sources may reflect on the area of the monitor. Place the monitor just below eye level.

Handle with care when transporting the monitor.

Refrain from giving the shock or scratch to the screen, as screen is fragile.

CLEANING YOUR MONITOR

No specific liquid or chemical necessary when cleaning this LCD monitor

However, we suggest to clean the monitor with non-abrasive cloths and cleaning solutions used in hospitals to clean similar equipment. We recommend using 70% Isopropyl alcohol for the screen surface and warm water and a mild detergent for all other surfaces. Other acceptable cleaning agents are listed below:

70% isopropyl alcohol

6% aqueous ammonia

Cidex (2.4% glutaraldehyde solution)

Sodium Hypochlorite (bleach) 10%

“Green soap” USP

0.5% Chlorhexidine in 70% isopropyl alcohol

Ovation

Formula 409

Fantastic

Wex Cide

To clean the screen, do not spray liquid cleaners directly on to the unit. Stand away Form the monitor and spray cleaning solution onto a cloth. Without applying excessive pressure, clean the screen with the slightly dampened rag.

Image 11
Contents Rev Revision ControlTable of Contents Press Properties to execute the Display Properties To change the resolution to its factory recommended presetScreen Adjustment Procedure To change the resolution to its factory recommended preset Press the Auto button on the monitor Introduction FeaturesUnpacking Symbol Explanations EU Declaration of Conformity for Medical Applications Screen Position Adjustment Cleaning Your Monitor Safety PrecautionOde Resolution H x Freq. KHz Freq. Hz Preset ModesOff Mode Power Management FunctionStand-by Mode Suspend ModeSteps InstallationDDC Video and Sound Connecting to a Television SignalStandard OSD Operation User ControlsFront Panel Controls OSD Scren Basic Section VGA Execute Recall Factory Default OSD Scren Basic Section DVI Push the select button to execute Recall OSD Scren Basic Section C-Video or S-Video Push the select button to execute Information Dpms OSD Function Description Under Analog DisplayIte m Function D e s cription OSD Function Description Under Digital DisplayDP M S OSD Function Description Under C-Video or S-Video DisplayLED OFF TroubleshootingAMM170TK SpecificationAMM17TK AMM18TK AMM19TK AMM19TK/HB Touch Port ConnectorsVideo Input Touch Screen Commencement and Duration of WarrantyPlace of Repair or Replacement Limitation of WarrantyTechnical Assistance Service InstallationQuick Start Touchmonitor installation Cable Connection AMM170TK/AMM17TK/AMM18TK/AMM19TK/AMM19TKHB